Updating...

How to Identify a Lippert Spring Axle From Its Tag

Most Lippert leaf spring trailer axles carry a printed identification tag on the axle tube. That tag holds almost everything you need to order the right replacement parts: the capacity, the brake and spindle type, the hub face and spring center widths, the hub bolt pattern, the leaf springs and even the lube system. The trick is that most of it is packed into one long coded line, the axle description.

This guide shows where to find the tag on a Lippert spring axle, what each printed field means, and how to read the axle description one code at a time, using Lippert's own example tag. Then it shows how to turn each code into the matching Lippert hubs, brakes, leaf springs and attaching parts Southwest Wheel carries. The information comes from Lippert's spring axle label nomenclature guide, its axle ID quick steps and FAQ, its 2,000 to 7,000 lb. axle owner's manual and its Premium Axle Parts catalog. Use it as an overview, not a substitute for the instructions supplied with your parts.

Key takeaways

  • Look on the back of the tube, in the middle. Lippert says the tag is normally on the center of the axle tube, on the back side of the beam, under the trailer frame between the wheels.
  • The item number and the axle description are two different things. The item (part or variant) number at the top is what Lippert uses to order that exact axle. The long coded line below it describes the axle, and that is the line you decode.
  • Read the description left to right. In order it gives the model (capacity), spindle and brake, hub face, spring center, tie plate, spring mounting, lubrication, hub or hub and drum, leaf spring and brake wire leads.
  • Capacity on the tag is for the axle, not the trailer. Lippert rates the axle by its lowest rated part, and the rating does not include the wheels and tires. The trailer maker sets the final GAWR on the trailer's VIN label.
  • No tag? Measure. Lippert says to measure the hub face, spring center and brake size. Use the capacity you know the trailer needs, not a guess from the size of the tube.

Terms used in this guide

  • Axle tag (label): The printed identification sticker on the axle tube. Lippert calls it the spring axle identification label.
  • Item number: The part number or variant number used to order the axle. Lippert says part numbers are standard builds and variant numbers are more custom builds.
  • Axle description: The long code made of short designations separated by dashes. It details the whole axle.
  • Hub face: The distance between the wheel mounting surfaces of the two hubs, often called hub face to hub face.
  • Spring center: The distance between the centers of the two leaf springs, where they sit on the axle.
  • Overslung and underslung: Overslung springs sit on top of the axle tube. Underslung springs hang underneath it.
  • Idler: A hub with no brake.
  • Pigtail: The short brake wire leads coming off the axle.

Where to find the tag on a Lippert axle

Lippert's quick steps say the tag is typically on the center of the axle tube, on the back side of the beam, underneath the trailer frame between the wheels. Clean the tube gently before you read it; road grime and old grease can hide characters. Take a clear photo of the whole tag so you have the numbers on hand when you shop or call.

If part of the tag is torn, painted over or faded, do not guess at the missing characters. One wrong digit in the hub face or a wrong spring code will send you to the wrong part. Measure the axle instead, as shown later in this guide.

The tag also has a QR code. Lippert's owner's manual says scanning it with an Android phone camera shows the serial number, load rating, item number and description, purchase details and the manufacture date. An iPhone camera only opens the Lippert website link, so you need a QR reader app to see the rest.

What is printed on the tag

Lippert's nomenclature guide labels six fields on a spring axle tag:

Field Example on Lippert's sample tag What it means
Item number (part or variant number) V000114573 The number used to order that exact axle from Lippert. Part numbers are standard builds; variant numbers are configured for more custom builds.
Axle description LCI52-SBSA-86.5-68.5-NOSP-OS-L-65517-7225-30PT V000114392 The coded line that details the whole axle. The rest of this guide decodes it.
Axle capacity 5200 lbs Based on the lowest rated Lippert part on the axle. It does not include tire and wheel ratings.
Date of manufacture 07/16/21 The date the axle was built.
RPO number RPO-000142306 The production run the axle belongs to.
CSA/QAI logo QAI Shown in the upper right corner only if the axle is CSA/QAI certified.

The tag also shows a serial number (S007244765 on the sample). The number at the very end of the axle description (V000114392 on the sample) is the axle beam assembly variant number. Lippert says it is for internal use only, so do not confuse it with the item number at the top of the tag.

How to read the axle description, code by code

Lippert's sample description is LCI52-SBSA-86.5-68.5-NOSP-OS-L-65517-7225-30PT. Each dash separates one designation. Here is what each piece of the sample means, in order:

Position Sample code What it tells you Sample meaning
1. Model LCI52 Capacity class and standard brake size 4,000 to 5,200 lbs., 12 x 2 in. brake
2. Spindle and brake SBSA Straight or drop spindle, and the brake type Straight spindle, electric drum brake with self-adjust
3. Hub face 86.5 Hub face to hub face, in inches 86.5 in.
4. Spring center 68.5 Spring center to spring center, in inches 68.5 in.
5. Tie plate NOSP Regular tie plate or shock plate No shock plate, regular tie plate
6. Spring mounting OS Springs on top of or under the tube Overslung, springs on top of the axle tube
7. Lubrication L Grease system or oil Super Lube: grease zerk in the spindle end, dust cap with rubber plug
8. Hub or hub and drum 65517 Bolt pattern, stud size and brake fit 6 on 5.5 in., 1/2-20 studs, 12 x 2 in. brake, disc brake or idler
9. Leaf spring 7225 The leaf spring on the axle Double-eye spring, 2,600 lbs., 4 leaves, 25-1/4 in. eye to eye (free)
10. Wire leads 30PT Brake pigtail length and side 30 in. pigtail, wired on the left (road) side, 18 gauge

So the sample tag describes a 5,200 lb. axle with self-adjusting 12 in. electric brakes on straight spindles, 86.5 in. hub face, 68.5 in. spring centers, overslung 2,600 lb. double-eye springs (two of them, which equals the 5,200 lb. rating), 6 on 5.5 in. hubs, Super Lube spindles and 30 in. brake leads.

Some tags have extra pieces. An ABS code after the hub designation means the axle has an ABS sensor and tone ring. Descriptors such as NO PWDR (no powder coat), NO CAMBER, CAP followed by a capacity, or a tube part number can be added near the end. CURT-branded Lippert axles use CURT in place of LCI in the model code, for example CURT52.

Model codes: capacity and standard brake

The model code is the first thing on the line. Lippert's nomenclature guide lists these models and standard electric brakes:

Model code Capacity Standard electric brake Lippert brake assemblies we carry
LCI20 1,000 to 2,000 lbs. 7 in. 7 x 1-1/4 in., left, right
LCI35 2,500 to 3,500 lbs. 10 x 2-1/4 in. Manual adjust left, right; self-adjusting left, right
LCI44 4,000 to 4,400 lbs. 10 x 2-1/4 in. heavy duty 4,400 lb. manual adjust left, right; self-adjusting left, right
LCI52 4,000 to 5,200 lbs. 12 x 2 in. Manual adjust left, right; self-adjusting left, right
LCI60 and LCI60MH 6,000 lbs. 12 x 2 in.
LCI70 and LCI70MH 7,000 lbs. 12 x 2 in.
LCI80H (hybrid) 8,000 lbs. 12 x 2 in.
LCI80 8,000 lbs. 12-1/4 x 3-3/8 in. Call with your tag
LCI100 and LCI100S (short) 10,000 lbs. 12-1/4 x 3-3/8 in. 10,000 lb. left, right
LCI120 and LCI160 12,000 and 16,000 lbs. 12-1/4 x 5 in. Call with your tag

Lippert lists its 12 x 2 in. assemblies for 5,200 to 8,000 lb. axles, which covers the 5,200, 6,000, 7,000 and 8,000 lb. hybrid models in the table. Brakes are sold by side, so order a left and a right for each axle. The 3,500 lb. and 4,400 lb. assemblies share the 10 x 2-1/4 in. size but are separate parts, so match the capacity on your tag. If a magnet is the only worn part, Lippert magnet kits come in three sizes: 10 x 2-1/4 in. (green), 12 x 2 in. (black) and 12-1/4 in. (yellow).

Keep in mind that a model code gives a capacity range on the lighter models. For example, an LCI35 axle can be built from 2,500 to 3,500 lbs. Use the capacity printed on the tag, not the top of the model range.

Spindle and brake codes

The second code starts with S for a straight spindle or D for a drop spindle. The letters after it give the brake. The most common ones on trailer axles are:

Code Spindle Brake
SB / DB Straight / drop Electric drum brake
SBSA / DBSA Straight / drop Electric drum brake with self-adjust
SBSALL / DBSALL Straight / drop Self-adjusting electric drum brake with 33 in. lead wires
SBWP / DBWP Straight / drop Electric drum brake with park feature
SI / DI Straight / drop Idler hub, no brake
SINF Straight Idler hub, no brake and no brake flange
SHUS / SHDS / SHUSFB Straight Hydraulic uni-servo, duo-servo, or uni-servo free-backing drum brake
DHUS / DHDS / DHUSFB Drop Hydraulic uni-servo, duo-servo, or uni-servo free-backing drum brake
SD / DD Straight / drop Hydraulic disc brake
SAB Straight Air brake

The spindle letter matters when you replace the whole axle, because a drop spindle lowers the trailer compared with a straight spindle. Lippert's catalog lists its drop spindle as a 4 in. drop. The brake letters matter for brake parts: a self-adjusting brake and a manual adjust brake are different assemblies, and a SINF axle has no brake flange, so brakes cannot simply be bolted on later. For more on how electric brakes fit an axle, see Electric Brakes on a Custom Dexter Axle.

Hub face and spring center

The third and fourth codes are plain measurements in inches. On the sample tag, 86.5 is the hub face and 68.5 is the spring center. Lippert says the hub face is a customer specified value, the distance between the wheel mounting surfaces of the hubs. The spring center is the distance between the spring centers on the axle, also customer specified, with overhang limits set by Lippert engineering. NOSS in this spot means no spring seats are welded on.

These two numbers are what make a replacement axle fit the trailer, so record them exactly. If you are matching a new axle to an old Lippert tag, the same two numbers carry over. For how to measure both, see How to Measure for a Custom Dexter Trailer Axle.

Tie plate, spring mounting and lubrication codes

  • Tie plate: NOSP means a regular tie plate and no shock plate. SPIB and SPOB mean a shock plate mounted for inboard or outboard shocks. FIXSS, ADJSS and HUTSS are spring seat options for 10,000 to 16,000 lb. axles. If your tag shows a shock plate and you need shock mounts, measure the tube and match a kit such as the Lippert shock mount kit for 3 in. axle tubes or the kit for 2-3/8 in. tubes.
  • Spring mounting: OS is overslung (springs on top of the axle tube). US is underslung (springs underneath). Changing between the two changes the trailer height. See Overslung vs Underslung and Camber.
  • Lubrication: L is Super Lube, with a grease zerk in the end of the spindle and a dust cap with a rubber plug. Lippert says it is standard on LCI20 to LCI80 and LCI80H axles. G is standard grease with a solid face dust cap and no zerk. O is oil lube, optional on LCI80 and LCI80H and standard on 10,000 to 16,000 lb. axles.

The lube code tells you which dust cap to buy. A Super Lube (L) hub needs a cap with the rubber plug, such as the 1.99 in. Super Lube cap for 2,200 to 4,400 lb. axles or the 2.45 in. Super Lube cap for 5,200 to 6,000 lb. axles, and a lost plug can be replaced with the universal rubber insert. A standard grease (G) hub takes a solid cap like the 1.99 in. non-lubed cap. An oil (O) hub on an 8,000 lb. axle uses an oil cap such as the 2-7/8 in. threaded oil cap. For greasing and adjusting the bearings, see Trailer Hub Bearing Adjustment and Grease, Step by Step.

Hub and hub and drum codes

The hub code gives the bolt pattern and stud size. It starts with the number of wheel bolts followed by the bolt circle, so 655 is 6 on 5.5 in. Extra digits or letters after that separate hubs with different studs or brakes, so read the whole code. A C in front means a CURT hub. Common codes and matching Lippert hubs we carry:

Hub code Bolt pattern and studs Fits Lippert hubs we carry
440 4 on 4 in., 1/2-20 studs Idler Call with your tag
545 5 on 4.5 in., 1/2-20 studs 10 x 2-1/4 in. brake, disc brake or idler 3,500 lb. idler hub with bearing kit; 3,500 lb. 10 in. brake hub with bearing kit
545/7 5 on 4.5 in., 1/2-20 studs 7 x 1-1/4 in. brake Call with your tag
5475, 550, 555 5 on 4.75, 5 or 5.5 in., 1/2-20 studs 10 x 2-1/4 in. brake or idler Call with your tag
655 6 on 5.5 in., 1/2-20 studs 10 x 2-1/4 in. brake, disc brake or idler 4,400 lb. idler hub with races and studs
65517 6 on 5.5 in., 1/2-20 studs 12 x 2 in. brake, disc brake or idler 6,000 lb. 12 in. brake hub complete kit
86517 8 on 6.5 in., 1/2-20 studs 12 x 2 in. brake, disc brake or idler 7,000 lb. 12 in. brake hub, 1/2 in. studs
86537 8 on 6.5 in., 9/16-18 studs 12 x 2 in. brake, disc brake or idler 7,000 lb. 12 in. brake hub, 9/16 in. studs
865H-9/16, 865H-5/8 8 on 6.5 in., 9/16 or 5/8 studs 12 x 2 in. brake (hybrid 8,000 lb.) Call with your tag
86580-9/16, 86580-5/8, 865 8 on 6.5 in., 9/16 or 5/8 studs 12-1/4 in. brakes Call with your tag

Two hubs can share a bolt pattern and still be different parts. A 655 hub is for the 10 in. brake on 4,400 lb. axles, while a 65517 hub takes the 12 x 2 in. brake. Match the full code, then check the bearing numbers on the old parts before you order. See How to Read a Tapered Roller Bearing Number and browse more trailer hubs with parts or the Lippert pre-greased self-adjusting brake kits.

Leaf spring codes

The leaf spring code names the spring on each side of the axle. Two springs carry the axle, so each spring is rated at half the axle capacity: the sample's 7225 spring is rated 2,600 lbs., and two of them make 5,200 lbs. Lippert's guide lists double-eye springs and slipper springs separately. Double-eye codes on lighter axles include:

Spring code Capacity per spring Leaves Free eye to eye length Matching Lippert spring we carry
7217 1,000 lbs. 3 20-3/8 in. 1,000 lb. double-eye, 21 in. loaded
7213 1,400 lbs. 4 20-1/2 in. 1,400 lb. spring, 21 in.
7242 1,750 lbs. 4 25-1/4 in. 1,750 lb. double-eye, 26 in.
7224 2,000 lbs. 3 25-1/4 in. 2,000 lb. double-eye, 26 in.
7278 2,200 lbs. 4 25-1/4 in. 2,200 lb. spring, 26 in.
7220 2,500 lbs. 4 23-1/8 in. 2,500 lb. double-eye, 24 in. loaded
7225 2,600 lbs. 4 25-1/4 in. 2,600 lb. spring, 26 in.
7226 3,000 lbs. 4 25-1/8 in. 3,000 lb. spring, 26 in.
7279 4,000 lbs. 7 24-7/8 in. 4,000 lb. spring, 26 in.

Lippert lists the free (unloaded) eye to eye length on the tag guide, while its catalog and our listings give the loaded length, which runs about 5/8 in. to 1-1/8 in. longer in Lippert's catalog. Match the capacity, the leaf count and the free length to your tag, and confirm by measuring the old spring eye to eye. Slipper springs (codes such as 7230, 7231 and 7232) have an eye on one end and a curved slipper end on the other; measure them from the eye to the end. If you are not sure which type you have, see Double-Eye vs Slipper Leaf Springs, and browse all trailer leaf springs.

Lippert's owner's manual calls for replacing sagging or broken springs and worn spring eye bushings. Lift the trailer by its frame, never by the axle, and block under the axle tube before you take the U-bolts off.

Wire lead codes

The last code before any extra descriptors is the brake wire lead. 18PT is the standard 18 in. pigtail wired on the left (road) side, and 30PT is a 30 in. pigtail on the same side. RW in front (RW-18PT, RW-30PT) means reverse wired, with the pigtails on the right (curb) side. PW means the axle was pre-wired as an idler so brakes can be added. This tells you which side the brake wires exit and how much lead to plan for when you wire new brakes. For splices, Lippert also sells a sealed wire connector for axles with electric brakes.

Using the tag to order attaching parts

The tag does not list the hangers and hardware, but it does tell you the two things you need to pick an attaching parts kit: the capacity (from the model code) and the spring type (from the spring code). Then you count the axles under the trailer and measure the axle spacing. Lippert kits we carry include:

Setup Lippert kit What it is for
Single axle, double-eye springs Attaching parts for double-eye single axles, no equalizer Shackle assemblies, shoulder bolts, shackle links and nuts for a single axle with 1-3/4 in. wide double-eye springs
Tandem axle, double-eye springs AP kit with standard equalizer or AP kit with tall equalizer Tandem axles with 1-3/4 in. wide double-eye springs and 33 in. axle spacing
Tandem axle, 12,000 or 16,000 lb., slipper springs Attaching parts for 12,000 and 16,000 lb. slipper tandem axles Equalizers, bolts and nuts for 3 in. wide slipper springs
Triple axle, 12,000 or 16,000 lb., slipper springs Attaching parts for 12,000 and 16,000 lb. triple axles, 48-1/2 in. Equalizers, bolts and nuts for 3 in. wide slipper springs, 48-1/2 in. axle spacing

Axle spacing has to match the hangers already welded to the frame. Measure center to center between axles before you order; see Hanger Spacing for Single and Tandem Leaf Spring Axles. For a smoother ride on a tandem or triple, see How Lippert Equa-Flex Works. More choices are in hanger and shackle kits and trailer equalizers, and the related replacement steps are in Replacing Trailer Shackles, Hangers and Equalizers.

The model code also points to the U-bolt size. Lippert's owner's manual lists 1/2 in. U-bolt nuts on 3,500 lb. axles and 9/16 in. on 5,200 to 8,000 lb. axles, which match the Lippert 1/2-20 U-bolt flange nut and 9/16-18 U-bolt flange nut. For U-bolt replacement and torque, see U-Bolt Torque and Replacement for Trailer Axles.

If the tag is missing or unreadable

Lippert's FAQ says to measure the hub face, the spring center and the brake size when the tag is gone. Then note the rest of the setup the tag would have told you:

  • Hub face: wheel mounting surface to wheel mounting surface.
  • Spring center: center of one spring to the center of the other, where they sit on the axle.
  • Brake size: diameter and width of the brake, or idler (no brake).
  • Straight or drop spindle, and overslung or underslung springs.
  • Bolt pattern and stud size of the hubs.
  • Spring type (double-eye or slipper), leaf count and eye to eye length.
  • Grease cap with a rubber plug (Super Lube), solid cap, or oil cap.

For capacity, use the capacity you know the trailer needs or the axle rating on the trailer's VIN label. Do not estimate it from the size of the axle tube or the parts on it. If you need a whole new axle, Southwest Wheel builds Dexter replacement axles to your measurements; see How to Identify Your Old Trailer Axle and Order a Dexter Replacement.

Checklist before you order

  • A clear photo of the whole tag, or a note that it is missing.
  • Item number and the full axle description.
  • Capacity printed on the tag.
  • Spindle and brake code: straight or drop, electric (manual or self-adjust), hydraulic, disc or idler.
  • Hub face and spring center.
  • Hub code (bolt pattern and stud size) and lube code.
  • Spring code, plus a measurement of the old spring.
  • Number of axles and axle spacing, if you need attaching parts.
  • Bearing numbers from the old hub, if you are replacing hubs or bearings.

Safety note

Axles, springs, hubs and brakes are safety equipment. Lippert says to replace brake parts at the same time for even braking. Follow the instructions supplied with your parts, and have the work checked by a qualified trailer technician before towing. The capacity on the tag is the axle rating only; the wheels, tires and trailer must also be rated for the load. Southwest Wheel sells new parts and does not provide installation service.

FAQ

Where is the tag on a Lippert trailer axle?

Lippert says it is normally on the center of the axle tube, on the back side of the beam, under the trailer frame between the wheels.

Which number do I use, the item number or the description?

Use both. The item number is what Lippert uses to order that exact axle. The axle description is the code you decode to order matching replacement parts. The V number at the very end of the description is an internal assembly number, not the item number.

Is the capacity on the tag the trailer's weight rating?

No. It is the axle rating, based on the lowest rated Lippert part on the axle, and it does not include wheels and tires. The trailer maker sets the final GAWR and prints it on the trailer's VIN label. See Choosing Trailer Axle Capacity.

What does SBSA mean on a Lippert axle?

Straight spindle with an electric drum brake that self-adjusts. SB is the same without self-adjust, and SI is a straight spindle with an idler hub and no brake.

What does the L in the description mean?

Super Lube: a grease zerk in the end of the spindle and a dust cap with a rubber plug. G is standard grease with a solid cap, and O is oil.

What does 7225 mean on the tag?

It is the leaf spring code. On Lippert's guide, 7225 is a double-eye spring rated 2,600 lbs. with 4 leaves and a 25-1/4 in. free eye to eye length.

What if my axle says CURT instead of LCI?

Lippert builds CURT models too. CURT replaces LCI in the model code, so CURT52 reads the same as LCI52, and the rest of the description decodes the same way.

Can I replace a Lippert axle with a Dexter axle?

Often, yes, if the replacement matches the capacity, hub face, spring center, spindle, brakes and spring mounting. Modern 8,000 lb. Lippert and Dexter axles are the same; older ones were not always, so measure first. See How to Identify Your Old Trailer Axle and Order a Dexter Replacement.

References

  • Lippert. Nomenclature Identification of Labels for Spring Axles (QR-162, CCD-0007341, Rev. 12.28.2022).
  • Lippert. Quick Steps: How to Identify Your Trailer Axle.
  • Lippert. FAQs About How to ID Your Trailer Axle.
  • Lippert. 2,000 to 7,000 lb. Axles and Running Gear Owner's Manual (CCD-0001412, Rev. 08.22.24).
  • Lippert. Premium Axle Parts catalog (2025).

Related guides

Find the right Lippert parts for your axle

Have a photo of your axle tag ready, or your hub face, spring center, brake size and spring measurements if the tag is gone, when you shop or call. Southwest Wheel has supplied trailer parts for 107 years, and we can help you match Lippert hubs, brakes, springs and attaching parts to your tag.

Shop Lippert Parts

Replacing the whole axle? See custom built Dexter trailer axles or pre-configured Dexter trailer axles. Rebuilding the suspension? See suspension kits, springs, hangers and U-bolts.

Call Southwest Wheel at 1-800-866-3336.

Southwest Wheel - Your Trailers Best Friend Since 1919.

 
Sign Up For Special Offers and News!

Get 5% off your first purchase , information on newest offers, and useful tips on how to get the most out of our services.

Valid once per customer on first purchase only. Not combinable with other offers or past orders.
 
Loading...