Dexter® Axle

Fits AL-KO and Hayes Axle, 10K - 16K axles equipped with electric brakes. (K1531044)

Fits AL-KO and Hayes Axle, 10K - 12K axles equipped with electric brakes. (K568251)

Fits Dexter electric brakes; contains wire connection and retention parts. Dx Part No Quantity Description

Fits Dexter axles (after 6/02). Note: Kit is not to be used on all D20, #8 and #9 axles. It should only be used on axles that have a factory installed "D" washer between the outer bearing and t

Fits Dexter Torflex #11 axles. Increases ride height by 2.88", for two axles. Dx Part No Quantity Description

Front pivot bushing replacement kit for one Airflex axle

The Dexter K71-318-00 is a grease cap kit for a Dexter 12" x 2" hub with 8 studs. The cap outside diameter is 2.72 inches. The kit includes two Dexter 021-039-00 grease caps, one for each end of the a

For 2800-6000 lb. axles with 33.5" axle spacing (A/P-202-00). Dx Part No Quantity Description 00

The Dexter® Axle Left Hand 10" x 2 1/4" Electric Brake Assembly (Part #K23-478-00) is a genuine Dexter Nev-R-Adjust self-adjusting electric brake designed for 4,400 lb. trailer axles. This left-hand b

Complete 10" x 2 1/4" electric brake assembly (4.4K), (after 5/1/09). Dx Part No Quantity Description

Complete 10" x 2 1/4" electric brake assembly (4.4K). 

Replaces all AL-KO and Hayes Axle, 10K - 12K axles equipped with electric brakes. (must be replaced in pairs for axles built prior to 09/2011) (K1531071)

The Dexter® Axle Lift Kit for Dexter® Torflex® #10 Axles (Part #K71-707-01) is a genuine Dexter factory-designed kit that raises the ride height of your Torflex torsion axle suspension. This lift kit

The Dexter® Axle Lift Kit for Dexter® Torflex® #9 Torsion Axle (Part #K71-723-01) is a genuine Dexter OEM lift kit designed to raise the ride height of Torflex® #9 torsion axles. This kit provides add

The Dexter® Axle Lift Kit for Two Dexter® Torflex® #10 Torsion Axles (Part #K71-707-02) is a genuine Dexter lift kit designed to increase the ride height of your tandem Torflex® #10 torsion axle suspe

The Dexter® Axle Metal Spring Bushings (Part #K71-291-00) are genuine Dexter OEM replacement metal bushings designed for use in trailer leaf spring suspension systems. These heavy-duty bushings provid

Titan Model 20: 20,000 lbs. capacity. 2,000 lbs. tongue load. This actuator is straight for drum brakes with 2 5/16" ball coupler.  15210

The Dexter® Axle Nut and Washer Kit for Dexter® 10,000 lbs. General Duty Trailer Axle (K71-367-00) is a complete nut and washer kit designed for secure wheel attachment and reliable performance on 10,

Fits all AL-KO and Hayes Axle, 10K - 16K axles. (K568220)

Fits AL-KO and Hayes Axle 8K axles 1997 and newer. (K363587)