TruRyde

The TruRyde BK-10KEHD-01 is a left-hand 12-1/4" x 4" self-adjusting electric brake assembly for a 10,000 lb. heavy-duty trailer axle with a seven-hole brake flange. It works on Dexter 10,000 lb. heavy

The TruRyde BK-10KEHD-02 is a right-hand 12-1/4" x 4" self-adjusting electric brake assembly for a 10,000 lb. heavy-duty trailer axle with a seven-hole brake flange. It works on Dexter 10,000 lb. heav

The TruRyde BK-12KE-01 is a left-hand 12-1/4" x 5" self-adjusting electric brake assembly for a 12,000 to 16,000 lb. trailer axle with a seven-hole brake flange. It works on Dexter axles. The backing

The TruRyde BK-12KE-02 is a right-hand 12-1/4" x 5" self-adjusting electric brake assembly for a 12,000 to 16,000 lb. trailer axle with a seven-hole brake flange. It works on Dexter axles. The backing

The TruRyde BK-12KH-01 is a left-hand 12-1/4" x 5" self-adjusting hydraulic brake assembly for a 12,000 lb. trailer axle with a seven-hole brake flange. It works on Dexter and Lippert axles. The backi

The TruRyde BK-12KH-02 is a right-hand 12-1/4" x 5" self-adjusting hydraulic brake assembly for a 12,000 lb. trailer axle with a seven-hole brake flange. It works on Dexter and Lippert axles. The back

The TruRyde BD-12K/16K-865 is a 12-1/4" x 5" trailer drum for a 12,000 to 16,000 lb. axle. It works with hubs RVI-12K-865-580 and RVI-16K-8275-M22. It works with hub and drums RVD-12K-865-580 and RVD-

The TruRyde HG-112 is a spring hanger for a 1-3/4" wide double eye spring. It is 1.12" long and the hole is 9/16". A single axle uses two of these rear hangers and two HG-144 front hangers. Part Numb

The TruRyde HG-246 is a weld-on spring hanger. It is 2.46" long and the hole is 9/16". It fits a 1-3/4" wide double eye spring and a 2" wide spring. A 3,500 lb. tandem kit uses four of these hangers a

The TruRyde 14125A is the outer tapered roller bearing for a 7,000 lb. 8-stud hub. The bore is 1.2500". It works with race 14276 and inner bearing 25580. Part Number: 14125A, Sold individually. TruRy

The TruRyde 14276 is a race. It is the outer race on a 6,000 and 7,000 lb. 8-stud hub. The bearing is 14125A. It works with hubs RVI-H-865, RVI-H-865-HDG, RVI-H-865-916, and RVI-H-865-916-HDG. It work

The TruRyde 15123 is the outer tapered roller bearing for a 5,200 lb. heavy-duty axle and a 7,000 lb. mobile home axle. The bore is 1.2500". It works with race 15245 and inner bearing 25580. Part Num

The TruRyde 15245-OE is a bearing race for the outer position on a 5,200 lb. heavy-duty hub, a 6,000 lb. 6-stud hub, and a 7,000 lb. mobile home axle. Southwest Wheel lists it as typical for an outer

The TruRyde DC-200 is a 2" closed dust cap for a 2,200 to 4,400 lb. axle. It works on BT8, BT9, BT16, and #84 hubs. The lubed cap is DC-200L with DC-RP. Part Number: DC-200, Sold individually. TruRyd

The TruRyde DC-200L is a 2" lubed dust cap for a 2,200 to 4,400 lb. axle. It works on BT8, BT9, BT16, and #84 hubs. The plug is DC-RP. The closed cap is DC-200. Part Number: DC-200L, Sold individuall

TruRyde 2.125" Double Lip Rubber Seal for 7,000 lbs. Axle - GS-2125DLR   Shaft Diameter: 2.125" Bore Diameter: 3.371" Seal OD.: 3.378" Seal Width:  0.375"

The TruRyde GS-2125DL is a 2.125" double lip seal for a 5,200 lb. heavy-duty to 7,000 lb. #42 spindle. It works with inner bearing 25580. Part Number: GS-2125DL, Sold individually. TruRyde 2.125" dou

TruRyde 2.25" Double Lip Rubber Seal for 8,000 lbs. Axle - GS-2250DLR   Shaft Diameter: 2.230" Bore Diameter: 3.371" Seal OD.: 3.378" Seal Width:  0.375" C

The TruRyde GS-2250DL is a 2.25" double lip seal for a 5,200 lb. heavy-duty to 8,000 lb. #42 spindle. It works with inner bearing 25580. Part Number: GS-2250DL, Sold individually. TruRyde 2.25" doubl

TruRyde 2.250" Triple Lip Seal for 8,000 lbs. Axle - GS-2250TLR