TruRyde

2-Pack 2.441" Grease/Dust Caps with removable center for lube-type spindles (#FS623P) Typical for 5,200 lb. axles.

Round 84 Spindle width of mounting surface= 1 1/2" length of mounting surface=4" overall length of spindle=8 3/8" Capacity (Pair) 2,000 lbs.

Square 84 Spindle width of mounting surface= 1 1/2" length of mounting surface=3.5" overall length of spindle=8 1/4" Capacity (Pair) 2,000 lbs.

Round Spindle 84 Spindle. Capacity (Pair) 3,000 lbs. 1.75 in. Shank Diameter. Overall Length 8.75 in. Spindle Length 4 in.

Part# BK-10E44K-L Will only fit 4,400 lbs. Lippert Trailer axles. Will not work Dexter axles, will not work 3,500 lbs. trailer axles. Left hand 10" x 2.25" 4,400 lbs. electric trailer

Part# BK-10E44K-R Will only fit 4,400 lbs. Lippert Trailer Axles. Will not work with Dexter Axles, will not fit 3,500 lbs. Trailer Axles. Right hand 10" x 2.25" 4,400 lbs. electric trailer b

Everything needed to mount your 10" trailer brakes to your trailer axle. Part No Quantity Description

The TruRyde 12" Trailer Brakes Mounting Hardware Kit (Part #12MOUNTKIT) contains all the necessary hardware to properly install a set of 12" TruRyde electric or hydraulic brake assemblies on your trai

The TruRyde® 2-5/16" 50 degree weld-on A-Frame Coupler (Part # TR-CA14K-2.31) is the current substitute for the no longer available CA-5400-B. This heavy-duty, low-profile design is engineered for sec

The TruRyde 1520 is a grease and dust cap for 5,200 to 6,000 lb. axles. The title diameter is 2.448 inches. The listing also gives the size as 2.45 inches in diameter and 1.34 inches high, and calls i

The TruRyde® 24,000 lbs. Heavy Duty 2-Speed Trailer Jack Combo is a high-capacity lifting solution designed for large and heavy trailers. This robust 2-speed jack comes complete with a handle and cros

The TruRyde® FS622PX2 is a 2-Pack of 1.980" Grease/Dust Caps with removable center designed for lube-type spindles. These caps are typical for 2,000 lb. and 3,500 lb. trailer axles and provide excelle

TruRyde® 3.12" Diameter Brake Flange - PFL-53.12

TruRyde® 3.12" Diameter Brake Flange - PFL-43.12

4-Pack 2.448" Grease/Dust Cap (#1520) Typical for 5,200 lb. axles.

4-Pack Trailer Hub Grease seal for BT8 Spindle Shaft I.D. - 1.25" Bore O.D. - 1.979" Width - .250"   Typical for BT8 Spindle.

4-Pack Trailer hub grease seal for BT9 Spindle Shaft I.D. - 1.50" Bore O.D. - 1.983" Width - .188"   Typical for BT9 Spindle.

Will only fit Lippert 4,400 lbs. Trailer Axles. Will not fit Dexter Axles, will not fit 3,500 lbs. axles.

The 6-5.5" Bolt Circle 4,400 lbs. TruRyde® Trailer Axle Electric Brake Kit with Timken® Bearings (Part #BK655ELE-44K-TK) is a premium brake kit specifically engineered for 4,400 lb. Lippert trailer ax

The TruRyde HL154AX4 is a four-pack of grease and dust caps. Each cap is 1.980 inches in diameter and is the #HL154A cap. It is typical for 2,000 and 3,500 lb. axles. The cap keeps dirt and water out