Made In The USA

Actuator Replacement Parts Kit: Emergency Cable Replacement Kit (A160-200). Dx Part No Quantity Description

Dexter Equalizer for 2.5" Wide Slipper Spring 48.5" Axle Spacing, 24.75" Long - 013-141-03

Dexter Equalizer for 3" Wide Slipper Spring 42.25" Axle Spacing, 18.5" Long - 013-108-03 

The Dexter K71-296-00 is a pack of five 60-degree wheel bolts. The bolt number is 007-040-00. The thread is 1/2"-20 UNF. The length is 0.88 inches. The catalog lists 007-040-00 on hub 008-259-05, 1/2"

The Dexter K71-753-00 is a pack of five screw-in wheel studs. The stud number is 025-011-00. One end is 9/16"-12 and the other end is 9/16"-18. The length is 3.06 inches. The catalog lists 025-011-00

The Dexter K71-298-00 is a pack of five rim clamps for a 5-spoke demountable 12" x 2" wheel drum. The clamp number is 015-002-00. The catalog lists 015-002-00 as the rim clamp on the 865 and demountab

Replaces ¹⁄₂"-20 hub thread, ¹⁄₂"-20 nut thread (2.2K)

The Dexter K71-342-00 is a pack of four press-in wheel studs. The stud number is 007-115-00. The thread is 5/8"-18 UNF. The length is 3.16 inches. It fits hub 008-214-05, 10,000 lb. #13D, 8 on 6.50".

Fits Dexter 12 1/4" x 5", 15K electric brakes (after 6/92). Fits Dexter 12 1/4" x 5", 12K electric brakes (after 6/92). Fits Dexter 12 1/4" x 3 3/8" 9K-10K or 12 1/4" x 4" 10K heavy duty electric br

For 6K Axle, 6-5.50 BC, Studded 1/2"-20, 2.125 seal, standard grease cap.  Dx Part No Quantity Description

The Dexter K71-354-00 is a hub and drum mounting bolt kit for 10,000 lb. heavy-duty, 12,000 lb., and 15,000 lb. axles. It includes four hex screws, 007-244-00. The thread is 1/2"-13 UNC. The length is

The Dexter K71-355-00 is a pack of four hex screws for 9,000 and 10,000 lb. general duty hubs. The screw number is 007-292-00. The thread is 1/2"-13 UNC. The length is 1.50 inches. These screws mount

Hub Kit, 6,000 lbs. 6-5.5", Zinc Plated with Trailer Buddy

Fits Dexter 10" x 2 1/4" electric brake, Nev-R-Adjust (3.5K).  Left Hand.

Fits Dexter 12 1/4" x 4" electric brake (10K HD), cast backing plate.  Left Hand.

Fits Dexter 12 1/4" x 5" electric brake (12k-15k), cast backing plate. Left Hand.

Fits Dexter 12 1/4" x 5" hydraulic brake (12K-15K). LH  Dx Part No Quantity Description 0

Fits Dexter 12" x 2" hydraulic brake (7K). Dx Part No Quantity Description 040-218-02

Fits Dexter 10" x 2 1/4" and 12" x 2" free backing, corrosion resistant, hydraulic brakes, uni-servo, 1 1/8" diameter.  Dx Part No Quantity

Fits Dexter 12¹⁄₄" x 3³⁄₈" and 12¹⁄₄" x 4" electric brakes (10K HD)