Made In The USA

Fits Dexter 12" x 2" electric brake (6K & 7K). Dx Part No Quantity Description 040-215-00

Fits Dexter 16 1/2" x 7" air brake.  Dx Part No Quantity Description 041-058-01

The Dexter 3,500 lb. standard spring axle beam is a 2-3/8" round tube with a 3/16" wall. The spindle is a Type 84 standard spindle (non EZ-Lube), with a 1-3/8" inner journal and a 1-1/16" outer journa

The Dexter® Axle K71-510-00 is a high-quality trailer axle component designed for reliable performance and durability. This precision part is built for smooth operation on compatible trailer axles. P

The Dexter® Axle K71-511-00 is a high-quality trailer axle component designed for reliable performance and durability. This precision part is built for smooth operation on compatible trailer axles. P

For 3.5K axle, 5-4.50 BC, studded 1/2"-20, 1.718 seal, E-Z Lube grease cap

The Dexter BK545ELE-DB-TK is a 10" electric brake kit for a 3,500 lb. #84 trailer axle with a 5 on 4.50" bolt circle and a four-hole brake flange. It includes two hub and drums, a left-hand brake, a r

The Dexter 545LB3E-DB-TK is a 5 on 4.50" hub and drum with parts for a 3,500 lb. axle. The studs are 1/2"-20. The inner bearing is Timken L68149. The outer bearing is Timken L44649. The seal is Timken

The Dexter K08-201-90 is a hub and drum kit for a 5,200 lb. axle. The bolt circle is 6 on 5.50". The studs are 1/2"-20. The seal is 2.125 inches. The grease cap is the standard cap. The hub and drum i

The Dexter K71-750-00 replaces a 5/8"-18 UNF wheel stud that is 2.50 inches long. The stud number in the kit is 076-130-00. It fits the 5/8"-18 hubs on 10,000 and 12,000 lb. axles, including the 10,00

The Dexter K71-752-00 replaces a 5/8"-18 UNF wheel stud that is 3.16 inches long. The 15,000 lb. hub, 8 on 275 mm, uses a 5/8"-18 stud. The drums on that hub are 009-028-01 and ABS 009-028-05. Made in

The Dexter BK13ELE-DB-TK is a 12" electric brake kit for a 5,200 lb. heavy-duty trailer axle with a 6 on 5.50" bolt circle. It includes two hub and drums, a left-hand brake, a right-hand brake, Timken

The Dexter 13HLB3E-DB-TK is a 6 on 5.50" hub and drum with parts for a 5,200 lb. heavy-duty axle. It works on a #42 spindle. The studs are 1/2"-20. The inner bearing is Timken 25580. The outer bearing

The Dexter K71-299-00 is a pack of six 60-degree cone wheel nuts. The thread is 1/2"-20 UNF. The nut number is 006-080-00. It fits the 5 on 4.50" hubs 008-271-04, 008-271-07, 008-258-04, 008-259-04, 0

The Dexter® Axle Dexter 6K, 7K & 8K Disc Brake Pads Set for One Axle (Part #K71-629-00) is a genuine Dexter OEM replacement brake pad set designed for 6,000 lb., 7,000 lb., and 8,000 lb. hydraulic

Converts one idler axle to 7" electric brakes with 5-4.50 BC (2.2K). Dx Part No Quantity Description

Converts one idler axle to 7" electric brakes with 4-4.00 BC (2.2K). Dx Part No Quantity Description

Fits Dexter 7" x 1 1/4" brake (after 4/1/90) and 10" x 1 1/2" brakes (prior to 9/1/88).  Dx Part No Quantity Description

The Dexter BK42865ELE-DB-TK is a 12" electric brake kit for a 7,000 lb. trailer axle with an 8 on 6.50" bolt circle and 1/2" studs. It includes two hub and drums, a left-hand brake, a right-hand brake

The Dexter 42865LB3E-DB-TK is an 8 on 6.50" hub and drum with parts for a 7,000 lb. axle. The studs are 1/2"-20. It works on a #42 spindle. The inner bearing is Timken 25580. The outer bearing is Timk