DeeMaxx MAXX KIT Electric Over Hydraulic 7,000 lb. Disc Brake Kit for a Triple Axle, Gold Zinc Caliper, Timken Bearings - DMK7IG3-TK

The DeeMaxx DMK7IG3-TK is an integral disc brake kit for a triple 7,000 lb. #42 axle. It covers six wheels. It is an 8 lug kit with 1/2" studs and a 13.1" integral rotor and hub. The calipers are gold zinc with semi-metallic pads. The bearings are Timken. The kit includes six rotors and hubs DM7KROTOR, six brackets DBB-7K-MAXX, and six calipers SWCALP7KGOLD. The pads are SWPAD7-8KBRAKEPAD. The kit includes the actuator TR-EOHA1600, the brake line kit DOT-TR20K, and the breakaway kit 2311-ZIP4. The kit includes the brake flange mounting stud HCS5006F020G5-ZP, the nut 38NFN, and the washer 38LW. Each rotor and hub is pre-raced and pre-studded. The stud is RTR/HUB-7K-131-STUD. The seals are GS-2125DL and GS-2250DL. The kit includes the Timken bearings, the seals, the caps, and the wheel nuts.

Part Number: DMK7IG3-TK, Sold as a triple kit. DeeMaxx 7,000 lb. electric over hydraulic integral disc brake kit with gold zinc calipers and Timken bearings.

Product details

• Part Number: DMK7IG3-TK
• Brand: DeeMaxx
• Part type: Electric over hydraulic integral disc brake kit, triple axle, Timken bearings
• Capacity: 7,000 lb. #42 axle
• Wheels: Six
• Lugs: 8 lug, 1/2" studs
• Includes rotors: Six DM7KROTOR, 13.1" integral rotor and hub, Maxx coating, pre-raced and pre-studded
• Stud: RTR/HUB-7K-131-STUD
• Bolt circle: 8 on 6.50"
• Includes brackets: Six DBB-7K-MAXX
• Includes calipers: Six SWCALP7KGOLD, gold zinc
• Includes pads: Semi-metallic, SWPAD7-8KBRAKEPAD
• Includes actuator: TR-EOHA1600
• Includes brake lines: DOT-TR20K
• Includes breakaway kit: 2311-ZIP4
• Includes mounting hardware: Brake flange mounting stud HCS5006F020G5-ZP, nut 38NFN, washer 38LW
• Includes bearings: Timken inner 25580, Timken outer 14125A
• Includes seals: GS-2125DL and GS-2250DL
• Includes cap: DC-275L with DC-RPY
• Includes wheel nuts: FA-6-080
• Bleeder: 120° bleeder
• Caliper marking: Laser writing on the caliper
• Caliper test: Every caliper is tested to 2,000 psi
• Caliper body: Ductile iron casting
• Bracket mounting: Twice as many mounting options for caliper position
• Factory: Produced in ISO quality certified factories
• Brake test: Passed the SAE J2681 brake test
• Uses spindle parts: FA-SN100, FA-SW100, FA-TW100, FA-CP175

Fitment note

This is an electric over hydraulic integral disc brake kit for a triple 7,000 lb. #42 axle. It covers six wheels. It is an 8 lug kit with 1/2" studs and a 13.1" integral rotor and hub. The bearings are Timken. The kit includes six rotors and hubs DM7KROTOR, six brackets DBB-7K-MAXX, and six calipers SWCALP7KGOLD. The pads are SWPAD7-8KBRAKEPAD. The kit includes the actuator TR-EOHA1600, the brake line kit DOT-TR20K, and the breakaway kit 2311-ZIP4. The kit includes the brake flange mounting stud HCS5006F020G5-ZP, the nut 38NFN, and the washer 38LW. Each rotor and hub is pre-raced and pre-studded. The stud is RTR/HUB-7K-131-STUD. The inner bearing is Timken 25580. The outer bearing is Timken 14125A. The seals are GS-2125DL and GS-2250DL. The cap is DC-275L with DC-RPY. The wheel nut is FA-6-080. The bleeder is 120°. The caliper has laser writing. Every caliper is tested to 2,000 psi. The caliper body is ductile iron. The bracket has twice as many mounting options for caliper position. It is produced in ISO quality certified factories and passed the SAE J2681 brake test. The spindle nut is FA-SN100. The spindle washer is FA-SW100. The tang washer is FA-TW100. The cotter pin is FA-CP175. Verify fitment before ordering or call for assistance.

Questions about this DeeMaxx kit or compatibility? Call 1-800-866-3336.

Browse more 7,000 lb. MAXX KIT electric over hydraulic integral disc brakes.