DeeMaxx MAXX KIT Electric Over Hydraulic 7,000 lb. Disc Brake Kit for a Tandem Axle, Maxx Caliper, TruRyde Bearings - DMK7IM2

The DeeMaxx DMK7IM2 is an integral disc brake kit for a tandem 7,000 lb. #42 axle. It covers four wheels. It is an 8 lug kit with 1/2" studs and a 13.1" integral rotor and hub. The calipers are Maxx finish with ceramic pads. The bearings are TruRyde. The kit includes four rotors and hubs DM7KROTOR, four brackets DBB-7K-MAXX, and four calipers SWCALP7KMAXX. The pads are SWPAD7-8KORGANIC. The kit includes the actuator TR-EOHA1600, the brake line kit DOT-TA20K, and the breakaway kit 2311-ZIP4. The kit includes the brake flange mounting stud HCS5006F020G5-ZP, the nut 38NFN, and the washer 38LW. Each rotor and hub is pre-raced and pre-studded. The stud is RTR/HUB-7K-131-STUD. The seals are GS-2125DL and GS-2250DL. The kit includes the bearings, races, seals, caps, and wheel nuts.

Part Number: DMK7IM2, Sold as a tandem kit. DeeMaxx 7,000 lb. electric over hydraulic integral disc brake kit with Maxx calipers and TruRyde bearings.

Product details

• Part Number: DMK7IM2
• Brand: DeeMaxx
• Part type: Electric over hydraulic integral disc brake kit, tandem axle
• Capacity: 7,000 lb. #42 axle
• Wheels: Four
• Lugs: 8 lug, 1/2" studs
• Includes rotors: Four DM7KROTOR, 13.1" integral rotor and hub, Maxx coating, pre-raced and pre-studded
• Stud: RTR/HUB-7K-131-STUD
• Bolt circle: 8 on 6.50"
• Includes brackets: Four DBB-7K-MAXX
• Includes calipers: Four SWCALP7KMAXX, Maxx finish
• Includes pads: Ceramic, SWPAD7-8KORGANIC, slotted and chamfered, stainless steel clip
• Includes actuator: TR-EOHA1600
• Includes brake lines: DOT-TA20K
• Includes breakaway kit: 2311-ZIP4
• Includes mounting hardware: Brake flange mounting stud HCS5006F020G5-ZP, nut 38NFN, washer 38LW
• Includes bearings: Inner 25580, outer 14125A
• Includes races: Inner 25520, outer 14276
• Includes seals: GS-2125DL and GS-2250DL
• Includes cap: DC-275L with DC-RPY
• Includes wheel nuts: FA-6-080
• Bleeder: 120° bleeder
• Caliper marking: Laser writing on the caliper
• Caliper test: Every caliper is tested to 2,000 psi
• Caliper body: Ductile iron casting
• Bracket mounting: Twice as many mounting options for caliper position
• Factory: Produced in ISO quality certified factories
• Brake test: Passed the SAE J2681 brake test
• Uses spindle parts: FA-SN100, FA-SW100, FA-TW100, FA-CP175

Fitment note

This is an electric over hydraulic integral disc brake kit for a tandem 7,000 lb. #42 axle. It covers four wheels. It is an 8 lug kit with 1/2" studs and a 13.1" integral rotor and hub. The bearings are TruRyde. The kit includes four rotors and hubs DM7KROTOR, four brackets DBB-7K-MAXX, and four calipers SWCALP7KMAXX. The pads are SWPAD7-8KORGANIC. The ceramic pads are slotted and chamfered and have a stainless steel clip. The kit includes the actuator TR-EOHA1600, the brake line kit DOT-TA20K, and the breakaway kit 2311-ZIP4. The kit includes the brake flange mounting stud HCS5006F020G5-ZP, the nut 38NFN, and the washer 38LW. Each rotor and hub is pre-raced and pre-studded. The stud is RTR/HUB-7K-131-STUD. The inner bearing is 25580. The outer bearing is 14125A. The inner race is 25520. The outer race is 14276. The seals are GS-2125DL and GS-2250DL. The cap is DC-275L with DC-RPY. The wheel nut is FA-6-080. The bleeder is 120°. The caliper has laser writing. Every caliper is tested to 2,000 psi. The caliper body is ductile iron. The bracket has twice as many mounting options for caliper position. It is produced in ISO quality certified factories and passed the SAE J2681 brake test. The spindle nut is FA-SN100. The spindle washer is FA-SW100. The tang washer is FA-TW100. The cotter pin is FA-CP175. Verify fitment before ordering or call for assistance.

Questions about this DeeMaxx kit or compatibility? Call 1-800-866-3336.

Browse more 7,000 lb. MAXX KIT electric over hydraulic integral disc brakes.