DeeMaxx 3,500 lb. Integral Disc Brake Kit for a Triple Axle, Maxx Calipers, TruRyde Bearings, Electric Over Hydraulic - DMK35IM3

The DeeMaxx DMK35IM3 is an integral disc brake kit for a triple 3,500 lb. #84 axle. It is a 5 lug kit with 1/2" studs and a 10.2" integral rotor and hub. The calipers are Maxx finish with ceramic pads. The bearings are TruRyde. The kit includes six rotors and hubs DM35KROTOR, six brackets DBB-3.5KI-MAXX, and six calipers SWCALP3-6KMAXX. The pads are SWPAD3-6KORGANIC. The kit includes the brake flange mounting bolt 716X114NFBLN, the nut 716NFN, and the washer 716LW. The kit includes the actuator TR-EOHA1600, the brake line kit DOT-TR20K, and the breakaway kit 2311-ZIP4. Each rotor and hub is pre-raced and pre-studded. The stud is RTR/HUB-102-120-STUD. The kit includes the bearings, races, seals, caps, and wheel nuts.

Part Number: DMK35IM3, Sold as a triple axle kit. DeeMaxx 3,500 lb. integral disc brake kit with Maxx calipers, TruRyde bearings, and an electric over hydraulic actuator.

Product details

• Part Number: DMK35IM3
• Brand: DeeMaxx
• Part type: Integral disc brake kit, triple axle, electric over hydraulic
• Capacity: 3,500 lb. #84 axle
• Lugs: 5 lug, 1/2" studs
• Includes rotor: DM35KROTOR, 10.2" integral rotor and hub, Maxx coating, pre-raced and pre-studded, six
• Stud: RTR/HUB-102-120-STUD
• Bolt circle: 5 on 4.50"
• Includes bracket: DBB-3.5KI-MAXX, six
• Includes caliper: SWCALP3-6KMAXX, Maxx finish, six
• Includes pads: Ceramic, SWPAD3-6KORGANIC, slotted and chamfered, stainless steel clip
• Includes mounting hardware: Brake flange mounting bolt 716X114NFBLN, nut 716NFN, washer 716LW
• Includes actuator: TR-EOHA1600, 1,600 psi
• Includes brake line kit: DOT-TR20K
• Includes breakaway kit: 2311-ZIP4
• Includes bearings: Inner L68149, outer L44649, six of each
• Includes races: Inner L68111, outer L44610, six of each
• Includes seal: GS-1719DL, six
• Includes cap: DC-200L with DC-RPY, six
• Includes wheel nuts: FA-6-080
• Bleeder: 120° bleeder
• Caliper marking: Laser writing on the caliper
• Caliper test: Every caliper is tested to 2,000 psi
• Caliper body: Ductile iron casting
• Bracket mounting: Twice as many mounting options for caliper position
• Factory: Produced in ISO quality certified factories
• Brake test: Passed the SAE J2681 brake test
• Uses spindle parts: FA-SN100, FA-SW100, FA-TW100, FA-CP175

Fitment note

This is an integral disc brake kit for a triple 3,500 lb. #84 axle. It is a 5 lug kit with 1/2" studs and a 10.2" integral rotor and hub. The bearings are TruRyde. The kit includes six rotors and hubs DM35KROTOR, six brackets DBB-3.5KI-MAXX, and six calipers SWCALP3-6KMAXX. The pads are SWPAD3-6KORGANIC. The ceramic pads are slotted and chamfered and have a stainless steel clip. The kit includes the brake flange mounting bolt 716X114NFBLN, the nut 716NFN, and the washer 716LW. The kit includes the actuator TR-EOHA1600, the brake line kit DOT-TR20K, and the breakaway kit 2311-ZIP4. Each rotor and hub is pre-raced and pre-studded. The stud is RTR/HUB-102-120-STUD. The inner bearing is L68149. The outer bearing is L44649. The inner race is L68111. The outer race is L44610. The seal is GS-1719DL. The cap is DC-200L with DC-RPY. The wheel nut is FA-6-080. The bleeder is 120°. The caliper has laser writing. Every caliper is tested to 2,000 psi. The caliper body is ductile iron. The bracket has twice as many mounting options for caliper position. It is produced in ISO quality certified factories and passed the SAE J2681 brake test. The spindle nut is FA-SN100. The spindle washer is FA-SW100. The tang washer is FA-TW100. The cotter pin is FA-CP175. Verify fitment before ordering or call for assistance.

Questions about this DeeMaxx kit or compatibility? Call 1-800-866-3336.

Browse more 3,500 lb. MAXX KIT electric over hydraulic integral disc brakes.