DeeMaxx 10.2" Rotor & Hub 5 Lug Integral with Maxx Coating - DM35KROTOR

The DeeMaxx DM35KROTOR is a 10.2" integral rotor and hub for a 3,500 lb. #84 axle. It has a 5 on 4.50" bolt circle and 1/2" studs. Maxx coating. The hub and rotor is pre-raced and pre-studded. The stud is RTR/HUB-102-120-STUD. The inner bearing is L68149 and the outer bearing is L44649. The inner race is L68111 and the outer race is L44610. The seal is GS-1719DL. The grease cap is DC-200L with DC-RP. The wheel nut is FA-6-080.

Part Number: DM35KROTOR, Sold individually. DeeMaxx 10.2" rotor and hub 5 lug integral with Maxx coating.

Product details

• Part Number: DM35KROTOR
• Brand: DeeMaxx
• Part type: Integral rotor and hub
• Diameter: 10.2 inches
• Capacity: 3,500 lb. #84 axle
• Bolt circle: 5 on 4.50"
• Stud size: 1/2"
• Stud part number: RTR/HUB-102-120-STUD
• Coating: Maxx
• Hub and rotor: Pre-raced and pre-studded
• Uses inner bearing: L68149, 1.3780 inch bore
• Uses outer bearing: L44649, 1.0625 inch bore
• Uses inner race: L68111
• Uses outer race: L44610
• Uses seal: GS-1719DL, 1.719 inch shaft
• Uses grease cap: DC-200L with DC-RP
• Uses wheel nut: FA-6-080, 1/2"
• Uses spindle nut: FA-SN100
• Uses spindle washer: FA-SW100
• Uses tang washer: FA-TW100
• Uses cotter pin: FA-CP175
• Works with bracket: DBB-3.5KI-MAXX
• Works with calipers: SWCALP3-6KGOLD, SWCALP3-6KMAXX
• Works with one-side kits: DM35KGOLD, DM35KMAX
• Works with EOH Maxx kits: DMK35IG1, DMK35IM1, DMK35IG2, DMK35IM2, DMK35IG3, DMK35IM3
• Works with actuator Maxx kits: DMK35IG1ACT, DMK35IG1ACT-TK, DMK35IM1ACT, DMK35IM1ACT-TK, DMK35IG2ACT, DMK35IG2ACT-TK, DMK35IM2ACT, DMK35IM2ACT-TK

Fitment note

This is a 10.2" integral rotor and hub for a 3,500 lb. #84 axle. It has a 5 on 4.50" bolt circle and 1/2" studs. Maxx coating. The hub and rotor is pre-raced and pre-studded. The stud is RTR/HUB-102-120-STUD. The inner bearing is L68149 and the outer bearing is L44649. The inner race is L68111 and the outer race is L44610. The seal is GS-1719DL on a 1.719 inch shaft. The grease cap is DC-200L with DC-RP. The wheel nut is FA-6-080. The spindle nut is FA-SN100. The spindle washer is FA-SW100. The tang washer is FA-TW100. The cotter pin is FA-CP175. It works with the bracket DBB-3.5KI-MAXX. It works with the calipers SWCALP3-6KGOLD and SWCALP3-6KMAXX. It works with the one-side kits DM35KGOLD and DM35KMAX. It works with the EOH Maxx kits DMK35IG1, DMK35IM1, DMK35IG2, DMK35IM2, DMK35IG3, and DMK35IM3. It works with the actuator Maxx kits DMK35IG1ACT, DMK35IG1ACT-TK, DMK35IM1ACT, DMK35IM1ACT-TK, DMK35IG2ACT, DMK35IG2ACT-TK, DMK35IM2ACT, and DMK35IM2ACT-TK. Verify fitment before ordering or call for assistance.

Questions about this DeeMaxx integral rotor and hub or compatibility? Call 1-800-866-3336.

Browse more DeeMaxx slip over and integral rotors.