The Dexter® Axle Dexter Pre-Greased Easy Assemble 6 on 5.5" Hub and Drum for 5,200 lbs. Trailer Axle (Part #K08-201-2G) is a genuine Dexter pre-greased hub and drum assembly designed for easy installation on 5,200 lb. trailer axles. From a novice to an expert in trailer repair, make life easy with the pre-greased easy to install trailer hub and drum from Dexter®. The experts at Dexter® Axle have already prepared the hub and drum to go on the trailer spindle smoothly.

Key Features

• Part Number: K08-201-2G
• Brand: Dexter®
• Axle Capacity: 5,200 lbs. (6K rated)
• Bolt Circle: 6 on 5.5"
• Type: Pre-Greased Hub and Drum Assembly
• Seal: 2.25" seal
• Convenience: Bearings, seal, and grease pre-installed with the exact amount needed
• Contents: E-Z Lube® & standard grease caps, spindle attachment hardware & lug nuts
• Quality: Genuine Dexter OEM replacement part with easy-to-read instructions

Don't worry about where the seal, inner, and outer bearings go — it is already done for you. The kit comes with all the parts you need to complete the installation no matter what type of spindle you have. Bearings and seal come installed & pre-greased for reliable, long-lasting performance.

Questions about this Dexter hub and drum or compatibility with your axle? Call our trailer experts at 1-800-866-3336.

Browse more Hub & Drum Assemblies.

Dx Part No	Quantity	Description
008-201-09	1	Hub & Drum,6K,15245 Outer Cup
031-030-02	1	Bearing Cone 25580
031-029-02	1	Bearing Cone 15123
010-036-00	1	Seal 2.25"
006-080-00	6	Nut, Cone 60-Deg
021-001-00	1	Grease Cap
021-042-01	1	Grease Cap
085-001-00	1	Rubber Plug
006-190-00	1	Nut, Retainer
006-191-00	1	Nut, Hex
005-057-00	1	Washer, "D"
005-223-00	1	Washer
019-002-00	1	Cotter Pin
059-831-00	1	Instruction Sheet
006-176-00	1	Nut, Slotted

Dexter® Pre-Greased Easy Assemble Hub & Drum Installation Instructions

From a novice to an expert in trailer repair, make life easy with the pre-greased easy to install trailer hub and drum from Dexter®. The experts at Dexter® Axle have already prepared the hub and drum to go on the trailer spindle smoothly. Don't worry about where the seal, inner, and outer bearings go — it is already done for you with the exact amount of grease you need to run the trailer axle properly.

Key Features

• Pre-Greased Hub and Drum Assembly
• Bearings and Seal pre-installed with correct grease amount
• Includes E-Z Lube® Grease Cap and Standard Grease Cap
• Spindle attachment hardware and lug nuts included
• Easy-to-read instructions for fast installation
• Designed for 5,200 lb. – 6,000 lb. axles (6 on 5.5" bolt circle example)

Installation Steps

1. Clean and lightly grease the spindle shaft.
2. Slide the pre-greased hub & drum onto the spindle.
3. Install spindle washer, nut, and cotter pin. Torque to specification while rotating the hub.
4. Install the E-Z Lube® or standard grease cap.
5. Mount the wheel and tighten lug nuts in a star pattern to proper torque.

Pro Tip: Repack or inspect bearings annually or every 12,000 miles. Use high-temperature marine grease for boat trailers.

Questions about installation or compatibility? Call our trailer experts at 1-800-866-3336.

Browse more Hub & Drum Assemblies.