Dexter Eight 9/16"-18 Studs, 2.30" Long, for 7,000 and 8,000 lb. Drums - K71-748-00

The Dexter K71-748-00 is a pack of eight replacement wheel studs for 7,000 and 8,000 lb. drums. The thread is 9/16"-18 UNF. The stud length is 2.30 inches. These studs fit the 8 on 6.50" drums that use 9/16" studs. On a 7,000 lb. axle that is K08-219-2G, K08-219-91, K08-219-9C, PGBK42865ELE916, and PGBK42865ELEAUTO916. On an 8,000 lb. axle that is K08-285-92, K08-285-94, K08-285-95, and 008-285-11. Made in the USA.

Part Number: K71-748-00, Sold as an eight-pack. Dexter 9/16"-18 replacement studs, 2.30 inches long, for 7,000 and 8,000 lb. drums.

Product details

• Part Number: K71-748-00
• Brand: Dexter Axle
• Part type: Replacement wheel studs
• Quantity: Eight studs
• Thread: 9/16"-18 UNF
• Length: 2.30 inches
• Capacity: 7,000 and 8,000 lb. drums
• Bolt circle: 8 on 6.50"
• 7,000 lb. drums: K08-219-2G, K08-219-91, K08-219-9C, PGBK42865ELE916, PGBK42865ELEAUTO916
• 8,000 lb. drums: K08-285-92, K08-285-94, K08-285-95, 008-285-11
• Origin: Made in the USA
• UPC: 0876983005314

Fitment note

This pack fits the 8 on 6.50" drums listed above. K08-219-91 uses a 2.125 inch seal and a standard cap. K08-219-9C uses a 2.25 inch seal and an E-Z Lube cap. K08-285-92 is the oil drum. K08-285-94 and K08-285-95 are grease drums. Confirm the old stud is 9/16"-18 and 2.30 inches long before ordering. Press the studs into the drum. Verify fitment before ordering or call for assistance.

Questions about these Dexter studs or compatibility? Call 1-800-866-3336.

Browse more studs for trailer hubs, drums and brakes.