TruRyde 5 on 4.50" Long Flange Idler Hub Only for a 2,000 lb. BT8, BT9, or BT16 Axle, up to 15" Wheels - RVI-BT-5450-LF

The TruRyde RVI-BT-5450-LF is a 5 on 4.50" idler hub only for a 2,000 lb. BT8, BT9, or BT16 axle. It is the long flange hub for wheels up to 15". The studs are 1/2". The hub is pre-raced and painted black.

Part Number: RVI-BT-5450-LF, Sold individually. TruRyde 5 on 4.50" long flange idler hub only for a 2,000 lb. BT8, BT9, or BT16 axle, up to 15" wheels.

Product details

• Part Number: RVI-BT-5450-LF
• Brand: TruRyde
• Part type: Idler hub only, long flange
• Capacity: 2,000 lb. axle
• Bolt circle: 5 on 4.50"
• Studs: 1/2"
• Wheels: Up to 15"
• Spindles: BT8, BT9, and BT16 1-1/16"
• Uses BT8 bearing: L44643, both ends, 1" bore
• Uses BT9 and BT16 bearing: L44649, both ends, 1-1/16" bore
• Uses race: L44610
• Uses BT8 seal: GS-1250DL, 1.25" shaft
• Uses BT9 and BT16 seal: GS-1500DL, 1.50" shaft
• Uses caps: DC-200 and DC-200L with DC-RP
• Uses wheel nut: FA-6-080
• Uses spindle parts: FA-SN100, FA-SW100, FA-TW100, FA-CP175
• Standard flange hub: RVI-BT-5450
• Galvanized hub: RVI-BT-5450-HDG

Fitment note

This is a hub only. It is the long flange 5 on 4.50" idler hub for a 2,000 lb. BT8, BT9, or BT16 axle, for wheels up to 15". The studs are 1/2". The hub is pre-raced and painted black. The standard flange hub is RVI-BT-5450. The galvanized hub is RVI-BT-5450-HDG. On a BT8 spindle the bearing is L44643 on both ends and the seal is GS-1250DL. On a BT9 or BT16 1-1/16" spindle the bearing is L44649 on both ends and the seal is GS-1500DL. The race is L44610. The caps are DC-200 and DC-200L with DC-RP. The wheel nut is FA-6-080. The spindle nut is FA-SN100. The spindle washer is FA-SW100. The tang washer is FA-TW100. The cotter pin is FA-CP175. Verify fitment before ordering or call for assistance.

Questions about this TruRyde hub or compatibility? Call 1-800-866-3336.

Browse more trailer hubs.