TruRyde 8 on 6.50" Oil Idler Hub for a 10,000 lb. Short Spindle Axle, 5/8" Studs - RVI-10KSHT-865-580

The TruRyde RVI-10KSHT-865-580 is an 8 on 6.50" oil idler hub for a 10,000 lb. short spindle axle. The studs are 5/8". It fits Lippert 10K short axles made after August 2020. It fits Dexter 10K GD short axles made after April 2013. The inner bearing is 387A. The outer bearing is 25580. The inner race is 382A. The outer race is 25520. The oil seal is OS-2875UNI. The oil cap is DC-O-400. The spindle nut is FA-SN150. The spindle washer is FA-SW150. The cotter pin is FA-CP175. The drum is BD-10K-SHT-865. It works with the standard hub RVI-10K-865-580.

Part Number: RVI-10KSHT-865-580, Sold individually. TruRyde 8 on 6.50" oil idler hub for a 10,000 lb. short spindle axle, 5/8" studs.

Product details

• Part Number: RVI-10KSHT-865-580
• Brand: TruRyde
• Part type: Oil idler hub
• Capacity: 10,000 lb. short spindle axle
• Bolt circle: 8 on 6.50"
• Stud size: 5/8"-18 x 3.44"
• Stud finish: Zinc plated
• Fitment: Lippert 10K short axles made after August 2020, Dexter 10K GD short axles made after April 2013
• Inner bearing: 387A, 2.250 inch bore
• Outer bearing: 25580, 1.7500 inch bore
• Inner race: 382A
• Outer race: 25520
• Oil seal: OS-2875UNI, 2.875 inch shaft
• Oil cap: DC-O-400
• Spindle nut: FA-SN150
• Spindle washer: FA-SW150
• Cotter pin: FA-CP175
• Drum: BD-10K-SHT-865
• Standard hub: RVI-10K-865-580
• Construction: Pre-raced and pre-studded, manufactured to automotive standards in ISO/TS-16949 registered factory, ASTM test bar method used to monitor tensile strength, chemically cleaned and painted black in electrostatic booth

Fitment note

This is an 8 on 6.50" oil idler hub for a 10,000 lb. short spindle axle. The studs are 5/8"-18 x 3.44" zinc plated. It fits Lippert 10K short axles made after August 2020. It fits Dexter 10K GD short axles made after April 2013. The inner bearing is 387A and the outer bearing is 25580. The inner race is 382A and the outer race is 25520. The oil seal is OS-2875UNI on a 2.875 inch shaft. The oil cap is DC-O-400. The spindle nut is FA-SN150. The spindle washer is FA-SW150. The cotter pin is FA-CP175. The drum is BD-10K-SHT-865. It works with the standard hub RVI-10K-865-580. Verify fitment before ordering or call for assistance.

Questions about this TruRyde hub or compatibility? Call 1-800-866-3336.

Browse more hub only.