Continuum Weight Distribution Hitch Standard Trailer Coupler Load Bar Unit 16K - WDHL4510

Fits: Standard Trailer Coupler. Does not include cylinder extension & Head Unit.

The goal of a weight distribution hitch is getting the correct amount of weight moved from the rear axles back to the front axles of your vehicle, keeping your vehicle driving safely. Traditional weight distribution hitches take an all-or-nothing approach: loaded or unloaded. The Continuum weight distribution hitch by B&W has several notable features that allow you to better control your towing experience. .

• One System Fits All: Composite spring bars allow the Continuum weight distribution hitch to cover tongue weights of 600-1600 lbs with a single bar size. No need to change out cumbersome steel bars when your load changes.
• Convenient: A closed-loop hydraulic cylinder and pump assembly make it possible to fine tune your setup. Adjustment is easy, pump the handle and watch as weight is moved from the rear axle to the front axle. If your trailer load changes, or if your steering doesn’t feel quite right, you can easily add or subtract weight for optimum towing in just a few seconds.
• Sway Control: The Continuum weight distribution hitch has as much, or more friction sway control built into it as the leading brands, although we prefer the term ‘sway prevention.’ Because our bars are always ‘loaded,’ our friction sway prevention is immediate and continuous.
• Quick Install: In most cases, the Continuum weight distribution hitch can be installed in 45 minutes or less, using only a 9/16” wrench. The head angle of the hitch is pre-set, and the bar assembly ships preassembled.
• Quiet Ride: Our single pivot design and composite spring bars made with LITEFLEX technology from Hendrickson eliminate noise and wear points.
  
• Made in America
  

WDHL4510 Installation Guide

Limited Lifetime Warranty 

WDHL4510 consists of 1 box.